Raymarine

Raymarine i70s Wind and DST Twin Transducer Pack

£1,595.00
Tax included.
T70586
Raymarine i70s system pack combining the 4.1 inch colour multifunction display with a short arm masthead wind transducer and a twin DST transducer pack. Wind, depth, speed and temperature data all reach the SeaTalkng network. Confirm exact transducer composition with Hudson Marine.
✓ Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

This Raymarine system pack is built around the i70s, the 4.1 inch colour multifunction instrument that turns one display into wind, speed, depth, tridata, engine and navigation pages. Alongside it come a short arm masthead wind transducer and Raymarine's twin DST transducer pack, covering depth, speed and temperature sensing from the hull.

The i70s presents the data on an optically bonded 1,200 cd/m2 screen with characters up to 43 mm tall, waterproof to IPx6 and IPx7, and connects to the SeaTalkng backbone with a single spur. Autopilots and Axiom chartplotters share the same network, and analogue sensors calibrate from the i70s display.

Raymarine's trade listing describes this pack as the DST twin transducer pack with short arm masthead unit; confirm the exact transducer part numbers and cabling with Hudson Marine when specifying an installation.

PRODUCT DETAILS

  • i70s 4.1 inch colour multifunction display
  • Short arm masthead wind transducer included
  • Twin DST transducer pack for depth, speed and temperature
  • Single SeaTalkng spur connection for the display
  • Confirm exact transducer composition with Hudson Marine

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Display

Screen4.1 inch TFT LCD, optically bonded
Resolution320 (H) x 240 (V)
Colours16 bit colour (64k colours)
Brightness1,200 cd/m2
Character heightUp to 43 mm (1.7 in)

Physical

Width110 mm (4.33 in)
Height115 mm (4.53 in)

Mounting

Panel cut-out92 mm (3 5/8 in) hole cutter

Power

Nominal supply voltage12 V dc
Operating voltage range9 V dc to 16 V dc (protected up to 32 V dc)
Current143 mA
Power consumption1.7 W
LEN (NMEA 2000 Load Equivalency Number)3

Connections

Data connections1x SeaTalkng connector

Environmental

Waterproof ratingIPx6 and IPx7
Relative humidity93% max
Operating temperature-25°C to +55°C (-13°F to +131°F)
Storage temperature-30°C to +70°C (-22°F to +158°F)

Conformance

ConformanceEurope 2004/108/EC; Australia and New Zealand C-Tick compliance level 2; NMEA 2000 certification pending at publication
Can I use my existing analogue transducers with the i70s?
Yes. The iTC-5 instrument transducer converter brings analogue depth, speed, temperature, wind and rudder transducers onto the SeaTalkng network, and the i70s provides full calibration of the transducers connected through it.
Which smart transducers connect directly to the backbone?
DST800 and DT800 smart transducers connect straight to the SeaTalkng backbone without an iTC-5 or pod, and the current DST810 Gen2 lists the i70s among its compatible displays.
Can the i70s show AIS targets?
Yes. The AIS repeater view displays the closest 25 AIS equipped vessels from an NMEA 2000 AIS receiver, and individual targets can be selected for vessel information.
How do I update the i70s software?
The i70s software updates through a connected, compatible Raymarine multifunction display. The latest packages and the update procedure are published at raymarine.com/software.
What size is the panel cut out for the i70s?
The i70s mounts through a 92 mm (3 5/8 in) hole, and mounting template 87260 is included in the Downloads tab.