Raymarine

Raymarine Alpha Power & RayNet Cable 5m

£95.00
Tax included. Shipping calculated at checkout.
A80753
A combined power and RayNet data cable for Raymarine Alpha performance displays, gives extra reach for runs through a console or deck. One cable powers the display and links it to your Axiom chartplotter network. A waterproof 8 A inline fuse holder is fitted.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

HME Care Plus

Raymarine cover is 2 years (3 with 90-day registration). Add 1 or 2 more years with HME Care Plus.

Extended cover is added to your order and confirmed with your warranty documentation.

Description

Alpha performance displays take power and data through a single 8 pin right angled connector, and this 5 m power and RayNet cable (A80753) gives extra reach for runs through a console or deck. The RayNet plug connects to your Raymarine Axiom or Axiom 2 Series chartplotter network, while the bare ended wires connect to a 12 V or 24 V supply: red positive, black negative, plus a grey drain wire for the vessel RF ground.

A waterproof holder with an 8 A inline fuse is fitted, enough for a full chain of four displays at 2 A per display. Only one display in a chain is powered directly; the rest take power and data through daisy chain cables. Compatible with both the Alpha 7 (E70649) and Alpha 9 (E70650); the displays do not include any cable in the box, so one power and RayNet cable is required per installation.

PRODUCT DETAILS

  • Single cable carries both 12/24 V dc power and RayNet Ethernet data
  • 5 m length with 8 pin right angled display connector
  • Bare ended power wires: red positive, black negative, grey drain
  • Waterproof fuse holder with 8 A inline fuse included
  • Required accessory: Alpha displays ship without a power cable
  • Suits both Alpha 7 (E70649) and Alpha 9 (E70650)

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

General

Cable type8-pin right-angled power to RayNet and bare-ended power wires cable
FunctionCarries 12 V / 24 V dc power and RayNet Ethernet data to an Alpha performance display
Length5 m
Inline fuseWaterproof fuse holder with 8 A inline fuse fitted (rate at 2 A per daisy-chained display)
Power wiresRed (positive), black (negative), grey (drain to RF ground)

Compatibility

Suitable forAlpha 7 (E70649) and Alpha 9 (E70650) performance displays

No videos available for this product.

Is a power cable included with the Alpha display?
No. Alpha performance displays are supplied without a cable. Every installation needs one combined power and RayNet cable (1 m, 3 m, 5 m or 10 m), and each additional daisy-chained display needs a 0.3 m or 1 m daisy chain cable.
What fuse should I fit?
The power and RayNet cable comes with a waterproof holder and an 8 A inline fuse. Rate the fuse for the chain it feeds: 2 A for one display, 4 A for two, 6 A for three and 8 A for four daisy-chained displays.
Can I run the cable inside the mast?
Yes. Cables connected to an Alpha display may be routed inside a hollow mast. Protect them from chafing where they enter and exit, and keep them away from other power or antenna cabling to minimise interference.