Seaflo
Seaflo BILGE PUMP 13A SERIES 12V 600GPH
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Seaflo 13A Series 600 GPH bilge pump is a compact, non-automatic submersible pump for small craft and general water transfer. Operated by a panel switch or a separate float switch, it clears the bilge on demand and includes an integrated check valve to stop water flowing back after the pump stops.
The pump draws just 2.5 A at 12V with a maximum head of 2.5 m, and its threaded discharge accepts a 3/4 inch (19 mm) or 1-1/8 inch (29 mm) hose. A split quick-connect joint lets the motor cartridge be replaced in seconds without disturbing the plumbing, and the unit is submersible and ignition protected with a stainless-steel shaft, moisture-tight seals and marine-grade tinned wiring to CE, RoHS, ISO 8846 and ISO 8849 standards.
PRODUCT DETAILS
- Compact 600 GPH flow at 12V DC
- Non-automatic, switched by panel or separate float switch
- Low 2.5 A current draw with a maximum head of 2.5 m
- Threaded discharge for 3/4 inch (19 mm) or 1-1/8 inch (29 mm) hose
- Integrated check valve prevents backflow
- Split quick-connect joint for tool-free motor replacement
- Stainless-steel motor shaft and moisture-tight seals
- Submersible and ignition protected to CE, RoHS, ISO 8846 and ISO 8849
- Seaflo 13A Series 600 GPH bilge pump
- Removable threaded discharge straight fitting
- Snap-fit strainer base
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Performance
| Flow Rate | 600 GPH |
| Maximum Head | 2.5 m (7.5 ft) |
Electrical
| Voltage | 12V DC |
| Current Draw | 2.5 A |
| Wire Lead | 1 m, 18 AWG |
Physical
| Discharge Outlet | 3/4 in (19 mm) / 1-1/8 in (29 mm) |
| Weight | 0.47 kg |
General
| Operation | Non-automatic, panel or float switch |
| Standards | CE, RoHS, ISO 8846, ISO 8849 |
No videos available for this product.
No downloads available for this product.
