Seaflo
Seaflo PRESSURE PUMP 42 SERIES 24V 3.0GPM 55PSI
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Seaflo 42 Series diaphragm pump provides pressurised fresh water on demand, delivering up to 3.0 gallons per minute at 55 PSI, enough to serve up to four fixtures at once. An automatic start and stop pressure switch runs the pump when a tap is opened and shuts it off when closed, while the variable-flow bypass reduces cycling for quieter operation and longer pump life.
Running on 24V, the pump is self-priming with up to 6 feet of suction lift and is safe to run dry. The head is built with a Santoprene diaphragm and EPDM valves for corrosion and abrasion resistance in fresh or salt water, and it connects via 1/2 inch MNPT ports (barbed hose adaptors supplied) with an inlet strainer to protect the valves.
PRODUCT DETAILS
- 3.0 GPM flow at 55 PSI on 24V DC
- Automatic pressure switch for on-demand operation
- Variable-flow bypass reduces cycling and noise
- Self-priming with up to 6 ft suction lift
- Safe to run dry
- Santoprene diaphragm and EPDM valves for corrosion resistance
- 1/2 inch MNPT ports with barbed hose adaptors supplied
- Serves up to four fixtures for marine, RV and off-grid use
- Seaflo 42 Series diaphragm pump
- Two 1/2 inch barbed hose adaptors
- 50 mesh inlet strainer
- Installation instructions
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Performance
| Flow Rate | 3.0 GPM |
| Maximum Pressure | 55 PSI |
| Suction Lift | Up to 6 ft (self-priming) |
Electrical
| Voltage | 24V DC |
Physical
| Ports | 1/2 in MNPT |
| Diaphragm Material | Santoprene |
| Valve Material | EPDM |
General
| Operation | On-demand, automatic pressure switch with bypass |
No videos available for this product.
No downloads available for this product.
