Victron
Victron MultiPlus Compact 48/500/6
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron MultiPlus Compact 48/500/6 combines a pure sine wave inverter, an adaptive battery charger and a high-speed AC transfer switch in one compact 48 V enclosure. When mains or generator power fails it takes over the supply seamlessly, so sensitive electronics keep running without interruption.
Built for marine, mobile and off-grid 48 V systems, it delivers 500 VA of clean 230 V output and recharges the battery bank through Victron's four-stage adaptive charge process. A built-in transfer switch and programmable relay make it simple to integrate into a wider Victron installation.
This model is from Victron's discontinued MultiPlus Compact range and remains a proven choice for smaller 48 V auxiliary and back-up duties.
PRODUCT DETAILS
- Pure sine wave inverter, charger and transfer switch in one compact unit
- 500 VA continuous output at 25°C with 900 W peak power
- Four-stage adaptive charger rated at 6 A for 48 V banks
- High-speed transfer switch keeps loads running during a power failure
- Programmable relay and battery temperature sensor for flexible installation
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 48 V |
| Continuous output power | 500 VA |
| Continuous output power at 25°C | 430 W |
| Peak power | 900 W |
| Maximum charge current | 6 A |
| Transfer switch | 16 A |
AC inputs
| AC input voltage range | 187 - 265 VAC |
| AC input frequency | 45 - 65 Hz |
Inverter
| DC input voltage range | 38 - 66 V |
| Output voltage / frequency | 230 VAC ±2%, 50 Hz ±0.1% |
| Cont. output power at 40°C (W) | 400 W |
| Cont. output power at 65°C (W) | 300 W |
| Peak power | 900 W |
| Maximum efficiency | 92% |
| Zero load power | 7 W |
| Zero load power in Search mode | 3 W |
Charger
| Charge voltage 'absorption' | 57.6 V |
| Charge voltage 'float' | 55.2 V |
| Storage mode | 52.8 V |
| Maximum charge current | 6 A |
| Charge curve | 4-stage adaptive |
| Battery temperature sensor | Yes |
Connectivity & control
| VE.Bus communication port | Yes (RJ45 splitter ASS030065510 needed for 500/800/1200 VA models) |
| Programmable relay | Yes |
| Remote on/off | On / off / charger only |
Protection
| Protection | Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65°C (fan assisted cooling) |
| Humidity (non-condensing) | Max 95% |
Physical
| Material & colour | Steel / ABS, blue RAL 5012 |
| Protection category | IP21 |
| Battery connection | 16/10/10 mm² (12/24/48 V) |
| 230 VAC connection | G-ST18i connector |
| Weight | 4.4 kg |
| Dimensions (h x w x d) | 311 x 182 x 100 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
