Victron
Victron BMV-712 Smart Battery Monitor
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron BMV-712 Smart is a high-precision battery monitor that keeps track of your battery bank's state of charge so you always know how much usable energy remains. An included 500A current shunt measures voltage and current on the battery negative, and the head unit displays state of charge, time-to-go, voltage, current and consumed amp-hours, along with a wide range of stored historical data for assessing usage patterns and battery health.
Bluetooth is built in, so you can read the data and change settings from a phone or tablet using the free VictronConnect app. A programmable visual and audible alarm and a bistable relay can switch off non-critical loads or start a generator when needed, while a second input can monitor a starter battery voltage, a temperature, or the midpoint voltage of a series-connected bank. A VE.Direct port allows the monitor to be connected to a Victron GX device for system monitoring on the VRM portal.
PRODUCT DETAILS
- High-precision battery monitor with included 500A / 50mV shunt
- Shows state of charge, voltage, current, consumed Ah and time-to-go
- Built-in Bluetooth for monitoring and setup via the VictronConnect app
- Programmable visual and audible alarm
- Bistable programmable relay (60V / 1A) to shed loads or start a generator
- Auxiliary input for a second battery, temperature or midpoint voltage
- Stores extensive historical data, up to 46 days of trends
- VE.Direct port for connection to a Victron GX device and VRM
- BMV-712 Smart head unit
- 500A / 50mV current shunt with quick-connect PCB
- RJ12 connecting cable, 10 m
- Battery cable with 1A slow-blow fuse for the positive connection
- Square and round front bezels
- Securing ring for rear mounting and screws for front mounting
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| Supply voltage range | 6.5 - 70 VDC |
| Shunt | 500 A / 50 mV (included) |
| Battery capacity range | 1 - 9999 Ah |
| Bluetooth | Built-in (Bluetooth Smart) |
| Current draw (back light off) | < 1 mA |
Measurement
| Readings | Battery voltage, current, power, consumed amp-hours, state of charge and time-to-go |
| Auxiliary input | Second battery voltage, temperature or midpoint voltage |
| Current resolution and accuracy | +/- 0.01 A, accuracy +/- 0.4% |
| Voltage resolution and accuracy | +/- 0.01 V, accuracy +/- 0.3% |
| State of charge resolution | +/- 0.1% |
| Stored trends | Up to 46 days |
Connectivity & control
| Bluetooth | Built-in, for the VictronConnect app |
| Data communication port | VE.Direct |
| Programmable relay | Bistable relay, 60V / 1A normally open (function can be inverted) |
| Alarms | Programmable visual and audible alarm |
Physical
| Installation | Flush mount |
| Head unit front diameter | 63 mm |
| Front bezel | 69 x 69 mm |
| Head unit body | 52 mm diameter x 31 mm deep |
| Shunt connection bolts | M10 |
| Protection category | IP55 (not intended for outdoor use) |
Environmental
| Operating temperature | -40 to +50 |
Conformance
| Safety | EN 60335-1 |
| Emission / immunity | EN 55014-1 / EN 55014-2 |
| Automotive | ECE R10-4 / EN 50498 |
