Actisense

Actisense NMEA 2000 Smart Universal Micro Terminator

£37.68
Tax included. Shipping calculated at checkout.
A2K-TER-U
The Actisense A2K-TER-U is the world's first intelligent universal inline terminator for NMEA 2000. Supplied with blanking caps, it works as a male, female or feed-through in-line terminator, so a single part covers every position. Built-in voltage monitoring drives green and red LEDs that show the health of the bus at a glance.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Actisense A2K-TER-U is the world's first intelligent universal in-line terminator for NMEA 2000 networks. Because it ships with blanking caps it can be used as a male terminator, a female terminator or a feed-through in-line terminator, which makes it genuinely universal and ideal for awkward positions such as the top of a mast where the required gender may not be known in advance. It can be fitted at the very end of the backbone or in-line in a location that is difficult to reach.

What sets the TER-U apart is its built-in diagnostic function. A high-accuracy voltage monitoring circuit continuously watches the bus voltage and drives internal LEDs: a green indication confirms the voltage is within the required range and of the correct polarity, while a red indication warns that the voltage has fallen below the minimum required level. If the LEDs do not light at all, there is no power or the polarity is reversed. Because the terminators illuminate, they also confirm at a glance that a terminator is actually present at each end of the network. It houses a 120 ohm resistor, uses gold-plated contacts in glass-filled carriers, carries a UL94 V0 flammability rating and is rated to IP67 when mated. Like the rest of the Actisense range it is NMEA 2000 certified and covered by the standard 5 year guarantee.

PRODUCT DETAILS

  • World-first intelligent universal inline terminator for NMEA 2000
  • Works as a male, female or feed-through in-line terminator, supplied with blanking caps
  • Built-in high-accuracy voltage monitoring continuously checks the bus
  • Green LED confirms healthy bus voltage and polarity; red LED warns of low voltage
  • Illuminated operation confirms a terminator is present, ideal for hard-to-reach locations
  • 120 ohm termination resistor, UL94 V0 housing and IP67 rated when mated

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Connections

TypeUniversal NMEA 2000 Micro terminator (male, female or in-line)

Electrical

Rated current4 A
Rated voltage36 V DC
Terminator resistance120 ohm 1%

Diagnostics

Green LEDNET-S ≥ 9.05 V ± 1%
Red LEDNET-S < 9.05 V ± 1%

Mechanical

Male contactBrass, gold plated
Female contactPhosphor bronze, gold plated
Contact carrierPA66 (30% glass filled), black
Mating threadM12 (male and female)
HousingPVC, black
Weight23.6 g
Flammability ratingUL94 V0

Environmental & Approvals

ProtectionIP67 (when mated)
Operating temperature-20°C to +70°C
Storage temperature-40°C to +85°C
CertificationNMEA 2000 Approved, RoHS compliant

General

Guarantee5 years

No videos available for this product.

No downloads available for this product.

No frequently asked questions for this product.