Garmin

Garmin ECU for GHP 12

£859.99
Tax included. Shipping calculated at checkout.
010-11053-30
Electronic control unit for the Garmin GHP 12 marine autopilot. Powers the course computer and the drive unit, converting autopilot heading data into steering output. A service and replacement part for GHP 12 systems.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

This electronic control unit (ECU) is the power and drive electronics for the Garmin GHP 12 marine autopilot. It connects to and powers the course computer unit and the drive unit, converting the autopilot heading commands into movement of the drive to steer the boat.

Fully gasketed and sealed against water ingress, the ECU must be mounted close to the drive unit because the connecting cables cannot be extended. It is intended as a service or replacement part for an existing GHP 12 installation and should be fitted by a qualified marine engineer.

PRODUCT DETAILS

  • Electronic control unit for the Garmin GHP 12 autopilot
  • Powers the course computer and the drive unit
  • Converts autopilot heading data into steering output
  • Fully gasketed aluminium alloy housing sealed to IPX7
  • 40 A blade fuse protection
  • Mounts close to the drive; connecting cables cannot be extended
  • Service and replacement part for GHP 12 systems

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Control Unit

TypeElectronic control unit (ECU) for the GHP 12 marine autopilot
FunctionConnects to and powers the course computer (CCU) and the drive unit, driving it from CCU data
Mounting proximityMount within 0.5 m (19 in.) of the drive unit; connecting cables cannot be extended

Physical

Dimensions (W x H x D)168 x 117 x 51 mm (6.6 x 4.6 x 2 in.)
Weight680 g (24 oz.)
MaterialFully gasketed, high-impact aluminium alloy
Water resistanceIEC 60529 IPX7
Operating temperature range-15 to 60 C (5 to 140 F)

Electrical

Input voltage11.5 to 30 Vdc
Fuse40 A, blade-type
Main power usage1 A (not including the drive unit)
Power cable length2.7 m (9 ft.)

No videos available for this product.

No downloads available for this product.

No frequently asked questions for this product.