Garmin
MSC™ 10 Marine Satellite Compass Heading Sensor and Multi-band GPS Receiver, black - 010-02407-10
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Garmin MSC 10 is a marine satellite compass that combines a multi-band GNSS receiver with a fully integrated attitude and heading reference system, here finished in black. By deriving heading from satellite signals rather than a magnetic sensor, it delivers heading accuracy to within 2 degrees that is not affected by magnetic interference, even in challenging situations. Multi-constellation support across GPS L1 and L5, Galileo, GLONASS and BeiDou fixes your position to within 1 metre, and a 10 Hz update rate keeps tracking smooth and detailed.
Along with heading, the MSC 10 supplies precise pitch, roll and heave information straight to a compatible Garmin chartplotter over the NMEA 2000 network, making it an ideal primary position and heading source for systems including autopilots. In the rare event that the satellite signal is lost, it transitions seamlessly to a backup magnetometer-based heading. The rugged ASA housing is rated to IPX7, requires no compass-safe distance, and mounts on a surface or a stainless steel pole.
PRODUCT DETAILS
- GPS-based satellite compass delivers heading accurate to within 2 degrees, immune to magnetic interference
- Multi-band, multi-constellation GNSS (GPS L1/L5, Galileo, GLONASS and BeiDou) for position to within 1 metre
- Fast 10 Hz position update rate for smooth, detailed tracking
- Outputs precise pitch, roll and heave even in rough seas
- Internal magnetometer provides backup heading if satellite signal is lost
- Can act as the primary position and heading source for chartplotters and autopilots
- NMEA 2000 certified with plug-and-play T-connector and 6 m drop cable
- Discreet black ASA housing rated to IPX7 with no compass-safe distance required
- MSC 10 marine satellite compass (black) with attached cable
- NMEA 2000 T-connector
- NMEA 2000 drop cable, 6 m (20 ft.)
- Surface-mount gasket and threaded rods with washers and nuts
- Pole-mount adapter with hardware
- Mounting template
- Marine sealant and thread adhesive
- Installation instructions
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
GNSS
| Satellite systems | Multi-band, multi-constellation: GPS (L1 and L5), Galileo, GLONASS and BeiDou (supported when available) |
| Position accuracy | Less than 1 metre CEP; less than 3 metres 95% |
| Position update rate | 10 Hz |
Heading
| Heading source | GPS-derived (satellite) heading, immune to magnetic interference; internal magnetometer backup when satellite signal is lost |
| Heading accuracy | Within 2 degrees |
| Attitude outputs | Pitch, roll and heave |
| Calibration | Not required for GPS heading; backup magnetic compass calibration recommended |
Connectivity
| Interface | NMEA 2000 (certified) |
| NMEA 2000 LEN | 6 (at 9 Vdc) |
Electrical
| Power input source | 9 to 32 Vdc, unregulated |
| Maximum input current | 275 mA at 9 Vdc |
| Typical input current | 180 mA at 12 Vdc |
| NMEA 2000 power draw | 2 W typical, 2.5 W maximum |
Physical
| Dimensions (length x width x height) | 334 x 156 x 66 mm (13 5/32 x 6 9/64 x 2 19/32 in.) |
| Weight | 810 g (28.6 oz.) |
| NMEA 2000 drop cable length | 6 m (19 ft. 8 in.) |
| Case material | ASA (acrylonitrile styrene acrylate) |
| Compass-safe distance | 0 mm (0 in.) |
| Mounting options | Surface or pole (stainless steel, 1 in. OD, 14 tpi) |
| Colour | Black |
Environmental
| Water rating | IPX7 |
| Operating temperature range | Black model: -15 to 60C (5 to 140F) |
| Storage temperature range | -40 to 85C (-40 to 185F) |
General
| Warranty | 2 years |
