Raymarine

Raymarine Evolution EV-DBW Drive-by-Wire Autopilot Pack

£2,795.00
Tax included. Shipping calculated at checkout.
T70164
Advanced digital autopilot for boats with drive-by-wire electronic steering. The EV-DBW pack pairs the EV-2 Sensor Core, which talks directly to the steering system over CAN bus, with the p70Rs rotary control head and EV-2 cabling kit. No ACU is required.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

HME Care Plus

Raymarine cover is 2 years (3 with 90-day registration). Add 1 or 2 more years with HME Care Plus.

Extended cover is added to your order and confirmed with your warranty documentation.

Description

The Raymarine Evolution EV-DBW Pilot (T70164) is the autopilot for vessels with drive-by-wire electronic steering. Its EV-2 Sensor Core communicates directly with the boat's digital steering system using CAN bus, so the usual actuator control unit and drive electronics are not needed; the steering gear itself executes the pilot's commands. The 9-axis sensor monitors pitch, roll, yaw and heading and adapts continuously, with no commissioning calibration.

The pack combines the EV-2 with the p70Rs rotary control head and the EV-2 Evolution cabling kit. SeaTalkng networking links the pilot to instruments and chartplotters, and a compatible Axiom display can command the system. For Volvo Penta IPS and Aquamatic installations, choose the EV-DBW Volvo Edition (T70214), which adds the ECI-100 engine interface and Volvo-specific cabling.

PRODUCT DETAILS

  • Digital autopilot for drive-by-wire electronic steering systems
  • EV-2 Sensor Core communicates with the steering system over CAN bus
  • No actuator control unit required
  • p70Rs rotary control head and EV-2 cabling kit included
  • 9-axis sensing with no commissioning calibration
  • Pilot control also available from compatible Axiom chartplotters
  • EV-2 Sensor Core (E70097)
  • p70Rs control head (E70329)
  • Evolution EV-2 cabling kit (R70192)

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

System

Autopilot typeEvolution EV-DBW Drive-by-Wire Autopilot
Suitable steering systemDrive-by-wire digital steering systems
Control headp70Rs control head (E70329)
Heading sensorEV-2 Sensor Core (E70097)
Drive unitNot included (choose a compatible drive for your steering system)
CablingEvolution EV-2 cabling kit (R70192)
Controller alternativesCompatible Raymarine Axiom family chartplotter (LightHouse 4 v4.4.70 or later for Axiom 2 Pro / Axiom 2 XL)
Which Evolution pack suits my boat?
Match the pack to your steering system: EV-100 Wheel or Tiller for cockpit-drive sailboats, EV-100, EV-150 or EV-200 Power for hydraulic steering depending on cylinder capacity, EV-200 Sail for below-decks mechanical steering, EV-300 for solenoid-controlled systems, EV-400 for Type 2 and Type 3 drives on larger vessels, and EV-DBW for drive-by-wire steering.
Does an Evolution autopilot need calibration?
No. Set-up is automatic: the rudder gain, rudder damping, counter rudder and compass calibration routines required by earlier autopilots are no longer necessary, and the system keeps refining itself as you use the boat. This is documented in the EV-1 installation instructions (87472).
Do I need a rudder angle reference sensor?
Raymarine highly recommends the rudder angle reference transducer (M81105) on every Evolution system for optimum performance, and it is essential on ACU-300 solenoid installations. The EV-400 Sail and Power packs include a rotary rudder feedback unit, and the ACU-300 ships with one.
How do I check the displacement ratings?
Use the vessel's fully laden displacement, which Raymarine notes is often around 20 percent above the designed displacement, when comparing your boat against a drive or pack rating.
Can I control the autopilot from my chartplotter?
Yes. Compatible controllers include the Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL and Axiom 2 XL chartplotter families as well as the p70s and p70Rs pilot heads. Axiom 2 Pro and Axiom 2 XL need LightHouse 4 v4.4.70 or later; earlier families are supported per the compatibility tables in document 87472.