Scanstrut

Scanstrut DS-HD6-BLK Double Horizontal Cable Seal

£37.49
Tax included. Shipping calculated at checkout.
DS-HD6-BLK
The Scanstrut DS-HD6-BLK is a black double horizontal cable seal that routes two cables side by side, each up to 6mm in diameter, through a single low side entry. The IP68 watertight seal keeps water out without marine sealant, and the black finish keeps twin feeds discreet on dark decks.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Scanstrut DS-HD6-BLK feeds two cables up to 6mm each through one horizontal entry, combining a pair of runs into a single clean side route. The black finish blends into dark hardtops and panels where a grey seal would be more visible.

Built from UV-stable, high-impact plastic, it holds an IP68 watertight seal with no marine sealant required. Captive nuts keep assembly quick on both cables and let the seal be refitted reliably each time the wiring is serviced or rerouted.

PRODUCT DETAILS

  • Double horizontal cable seal for routing two cables externally to internally
  • IP68 watertight seal
  • Fits two cables of 5 mm and 6 mm in any combination
  • Black finish to blend with dark surfaces
  • Compact footprint - just 54 mm W x 63 mm L x 24 mm H
  • Includes 316 stainless steel fixings and a waterproof 3M gasket
  • UV-stable, hard-wearing materials with no messy sealant on the bungs
  • Cable seal shell x1 (black)
  • Base x1
  • Gasket x1 (3M waterproof)
  • Sealing bungs x6 (2 blank, 2 x 5 mm, 2 x 6 mm)
  • No. 6 x 16 stainless steel self-tapping screws x4
  • M5 x 10 black bolt x1
  • Installation instructions

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

General

Cable typeTwin cable (2 cables)
Cable diameter range5 mm and 6 mm (0.19 in and 0.23 in) in any combination
OrientationHorizontal double (side entry)
Waterproof ratingIP68 watertight

Dimensions

Width54 mm (2.13 in)
Length63 mm (2.48 in)
Height24 mm (0.94 in)

Fixing

Cable hole25 mm (1 in) diameter
Fixings4 x No. 6 x 16 self-tapping screws and 1 x M5 x 10 bolt (supplied)
Pilot hole2.5 mm (3/32 in) soft material, 3 mm (1/8 in) hard material

Materials

Trim materialHigh impact plastic
FinishBlack
Fixings material316 stainless steel
GasketWaterproof 3M gasket
Sealing bungs6 x bungs (2 blank, 2 x 5 mm, 2 x 6 mm)

No downloads available for this product.

No frequently asked questions for this product.