Scanstrut

Scanstrut DS21A-P Small Cable Seal - Plastic - Black

£28.99
Tax included. Shipping calculated at checkout.
DS21A-P-BLK
The Scanstrut DS21A Small in black is a vertical entry cable seal configured for one larger cable or connector up to around 21mm. Moulded in black high-impact plastic to match dark trim, it routes a heavier lead through a deck or bulkhead and seals to IP68 watertight. Fit it without removing the connector, with no sealant.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

This black DS21A Small handles the same single larger cable or connector up to roughly 21mm as the grey model, finishing heavier runs like power feeds and radar cables to suit black hardtops, arches and helm trim.

The low-profile dome is moulded from tough black high-impact plastic, and the pre-drilled, blank and split bungs supplied let one seal cope with a range of diameters up to its limit. Captive nuts keep assembly quick and repeatable.

You route the cable without removing its connector and apply no sealant, so a watertight IP68 entry for a single heavy lead that blends with your black equipment goes in within minutes.

PRODUCT DETAILS

  • Watertight cable seal for routing a single cable through a deck or panel
  • Suits cable diameters from 4 to 9 mm (0.17-0.31 in)
  • Black finish to blend with dark decks and panels
  • 49 mm flange with a 45.7 mm cut-out
  • Graduated bungs to match the exact cable size
  • No messy sealant needed on the bungs
  • Cable seal shell x1 (black)
  • Base x1
  • Gasket x1
  • Sealing bungs x4
  • No. 6 x 16 self-tapping screws x3
  • M4 x 10 black bolts x3
  • Installation instructions

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

General

Cable typeSingle cable
Cable diameter range4-9 mm (0.17-0.31 in)
OrientationVertical (deck / top entry)
Waterproof ratingWatertight seal

Dimensions

Outer flange diameter49 mm (1.93 in)
Bore / cable opening diameter21 mm (0.83 in)
Height20.5 mm (0.81 in)

Fixing

Cut-out diameter45.7 mm (1.8 in)
Fixings3 x No. 6 x 16 self-tapping screws and 3 x M4 x 10 bolts (supplied)
Pilot hole2.5 mm (3/32 in) soft material, 3 mm (1/8 in) hard material

Materials

Trim materialPlastic
FinishBlack
Sealing bungs4 x graduated bungs

No videos available for this product.

No frequently asked questions for this product.