Maretron
TANK LEVEL ADAPTER
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Maretron TLA100 Tank Level Adapter lets you bring an existing resistive tank sender onto your NMEA 2000 network, so tank levels can be viewed anywhere on the vessel using a compatible display such as the Maretron DSM410 or DSM570. It is compatible with both American standard (240-30 ohm) and European standard (10-180 ohm) senders, and can be user-calibrated for any resistance range between 0 and 300 ohms.
Unlike most senders that only work with rectangular tanks, the TLA100 offers 16-point calibration so it can be matched to irregular tank shapes for a true reading, with programmable tank types, tank numbers and capacity. It can be wired alongside existing analogue gauges at the same time as the NMEA 2000 network, so you do not have to give up gauges you already have to enjoy the advantages of digitally networked tank information, or it can be used standalone.
PRODUCT DETAILS
- Adapts resistive tank senders to an NMEA 2000 network
- Works with American (240-30 ohm) and European (10-180 ohm) senders
- Calibrates to any resistance from 0 to 300 ohms
- 16-point calibration for irregularly shaped tanks
- Runs alongside existing analogue gauges or standalone
- View tank levels on any compatible NMEA 2000 display
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
Performance
| Accuracy | plus/minus 2% (excludes analogue gauge or sender inaccuracy) |
| Resolution | plus/minus 1% (worst case) |
| American Standard Senders | 240-30 ohms |
| European Standard Senders | 10-180 ohms |
| Calibration Resistance Range | 0-300 ohms |
| Number of Tank Types | 16 (fuel, fresh water, waste water, live well, oil, etc.) |
| Tanks per Tank Type | 16 (numbered 0-15) |
| Irregular Tank Shapes | Yes, 16-point calibration |
| Analogue Gauge Support | Yes, can be used with or without analogue gauge |
Electrical
| Operating Voltage | 9 to 16 Volts DC |
| Power Consumption | < 100mA |
| Load Equivalence Number (LEN) | 2 |
| Reverse Battery Protection | Yes, indefinitely |
Mechanical
| Size | 3.9" x 1.2" x 1.0" (99mm x 30.5mm x 25.4mm) excluding NMEA 2000 connector and cable |
| Weight | 9 oz. (255 g) |
| Mounting | Any orientation |
Environmental
| Degree of Protection | IP67 |
| Operating Temperature | -25C to 55C |
| Storage Temperature | -40C to 70C |
NMEA 2000
| NMEA 2000 Standard | Level B+ |
Certifications
| Compliance | IEC 61162-3, IEC 60945, FCC and CE Mark |
No videos available for this product.
No downloads available for this product.
