Maretron
TANK LEVEL MONITOR 40" DEPTH
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Maretron TLM100 Tank Level Monitor uses ultrasonic technology to sense fluid levels, transmitting sound waves from the top of the tank and measuring their flight time to and from the fluid, much like a depth sensor. This means there are no difficult, long probes protruding into the tank that can foul or corrode. It measures tanks up to 40 inches (1.02m) deep and can be used for diesel, fresh water, waste water, black water and oil (see the TLM150 for gasoline or the FPM100 for deeper tanks).
Unlike most senders that only work with rectangular tanks, the TLM100 can be calibrated for irregular tank shapes so you know the true level in your tanks, and programmable tank capacity lets displays calculate the amount remaining. It mounts to the top of the tank using the industry-standard SAE J1810 five-hole pattern, or to threaded openings using optional 1.5" NPT or 1.25" BSP adapters. An optional focus tube permits use on planing hulls. Levels are viewable on any compatible NMEA 2000 display such as the Maretron DSM410 or DSM570.
PRODUCT DETAILS
- Ultrasonic sensing with no probes to foul or corrode
- Measures tanks up to 40 inches (1.02m) deep
- Suits diesel, fresh water, waste water, black water and oil
- Calibrates to irregular tank shapes for a true reading
- Mounts to SAE J1810 five-hole pattern or optional NPT/BSP adapters
- Broadcasts level over NMEA 2000 for viewing anywhere on the vessel
No exploded diagram available for this product.
No compatible transducers listed for this product.
Performance
| Accuracy | plus/minus 2% |
| Resolution | plus/minus 1% |
| Maximum Tank Depth | 40" (1.02m) |
| Minimum Depth Reading | 2" (5.08cm) sensor deadband |
| Number of Tank Types | 16 (fuel, fresh water, waste water, live well, oil, etc.) |
| Tanks per Tank Type | 16 (numbered 0-15) |
| Irregular Tank Shapes | Yes, can be calibrated for any shape |
| Maximum Tank Angle | 6 degrees without focus tube, 15 degrees with focus tube |
Electrical
| Operating Voltage | 9 to 16 Volts DC |
| Power Consumption | < 100mA |
| Load Equivalence Number (LEN) | 2 |
| Reverse Battery Protection | Yes, indefinitely |
Mechanical
| Interface Component Size | 3.9" x 1.2" x 1.0" (99mm x 30.5mm x 25.4mm) |
| Sensor Component Size | 2.7" dia. x 0.9" (68.6mm dia. x 22.9mm) |
| Interconnecting Cable | 8.5" (215.9mm) |
| Weight | 12 oz. (340 g) |
| Mounting | SAE J1810 five-hole bolt pattern (or 1.25" BSP / 1.5" NPT with adapters) |
Environmental
| Degree of Protection | IP67 |
| Operating Temperature | -25C to 55C |
| Storage Temperature | -40C to 70C |
NMEA 2000
| NMEA 2000 Standard | Level B |
Certifications
| Compliance | Tested to IEC 60945, FCC and CE Mark |
No videos available for this product.
No downloads available for this product.
