Maretron
Maretron Tank Level Monitor 24" Depth Gasoline Tanks
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Maretron TLM150 Tank Level Monitor is engineered specifically for gasoline (petrol) tanks and uses ultrasonic technology to sense fluid level. Sound waves are transmitted from the top of the tank and their flight time to and from the fluid is measured, much like a depth sensor, so there are no difficult, long probes protruding into the tank to foul or corrode. It measures gasoline tanks up to 24 inches (0.61m) deep (see the TLM100 for fluids other than gasoline).
Unlike most senders that only work with rectangular tanks, the TLM150 can be calibrated for irregular tank shapes so you know the true level, and programmable tank capacity lets displays calculate the amount remaining. It mounts to the top of the tank using the industry-standard SAE J1810 five-hole pattern, or to threaded openings using optional 1.5" NPT or 1.25" BSP adapters, and an optional focus tube permits use on planing hulls. Levels are viewable on any compatible NMEA 2000 display such as the Maretron DSM410 or DSM570.
PRODUCT DETAILS
- Ultrasonic sensing designed specifically for gasoline (petrol) tanks
- Measures gasoline tanks up to 24 inches (0.61m) deep
- No probes to foul or corrode inside the tank
- Calibrates to irregular tank shapes for a true reading
- Mounts to SAE J1810 five-hole pattern or optional NPT/BSP adapters
- Broadcasts level over NMEA 2000 for viewing anywhere on the vessel
No exploded diagram available for this product.
No compatible transducers listed for this product.
Performance
| Accuracy | plus/minus 2% |
| Resolution | plus/minus 1% |
| Fluid Type | Gasoline (petrol) only |
| Maximum Tank Depth | 24" (0.61m) |
| Minimum Depth Reading | 2" (5.08cm) sensor deadband |
| Number of Tanks | 16 (numbered 0-15) |
| Irregular Tank Shapes | Yes, can be calibrated for any shape |
| Maximum Tank Angle | 6 degrees without focus tube, 15 degrees with focus tube |
Electrical
| Operating Voltage | 9 to 16 Volts DC |
| Power Consumption | < 100mA |
| Load Equivalence Number (LEN) | 2 |
| Reverse Battery Protection | Yes, indefinitely |
Mechanical
| Interface Component Size | 3.9" x 1.2" x 1.0" (99mm x 30.5mm x 25.4mm) |
| Sensor Component Size | 2.7" dia. x 0.9" (68.6mm dia. x 22.9mm) |
| Interconnecting Cable | 8.5" (215.9mm) |
| Weight | 12 oz. (340 g) |
| Mounting | SAE J1810 five-hole bolt pattern (or 1.25" BSP / 1.5" NPT with adapters) |
Environmental
| Degree of Protection | IP67 |
| Operating Temperature | -25C to 55C |
| Storage Temperature | -40C to 70C |
NMEA 2000
| NMEA 2000 Standard | Level B |
Certifications
| Compliance | Tested to IEC 60945, FCC and CE Mark |
No videos available for this product.
No downloads available for this product.
