Garmin
Garmin SS60 Through Hull Transducer 20 Degree Tilted Element 8 pin
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The SS60 is an entry-level stainless steel thru-hull transducer that provides a vertical beam without the need for a fairing. The 600 W housing is well suited to aluminium and other metal hulls and gives reliable depth and temperature readings for inshore and coastal use.
Operating at 50 kHz and 200 kHz, it reaches depths of 800 to 1,200 ft with a wide 45 degree low-frequency and 12 degree high-frequency beam for good coverage and fish detection. It reports both depth and temperature through an 8-pin connector on a 39 ft cable.
This version carries a 20 degree tilted element so the beam fires vertically on hull deadrise angles from 16 to 24 degrees. When connecting to a 6-pin Garmin sounder, a transducer adapter cable (010-11612-00) is required.
PRODUCT DETAILS
- 600 W stainless steel thru-hull transducer, no fairing required
- Stainless housing suited to aluminium and other metal hulls
- Dual 50/200 kHz with a wide 45/12 degree beamwidth
- Depth capability of 800 to 1,200 ft, reports depth and temperature
- 20 degree tilted element suits 16 to 24 degree hull deadrise
- 8-pin connector on a 39 ft cable
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
General
| Model | Airmar SS60 (stainless steel) |
| Mounting type | Thru-hull (flush, no fairing required) |
| Element tilt | 20 degree tilted element |
| Functions | Depth and temperature |
Sonar
| Operating frequency | 50/200 kHz |
| Power | 600 W RMS |
| Beamwidth (LF/HF, -3dB) | 45 / 12 degrees |
| Maximum depth | 800 to 1,200 ft |
Physical
| Housing material | Stainless steel |
| Connector | 8-pin |
| Cable length | 39 ft |
| Supported deadrise | 16 to 24 degrees |
Compatibility
| Compatible sounder module | Pairs with the Garmin GSD 24 remote sounder. When using with a 6-pin Garmin sounder, a transducer adapter cable (010-11612-00) is required. |
No videos available for this product.
No frequently asked questions for this product.
