B&G
B&G WTP3 Analogue Interface, CAN cable and CAN T-piece
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Manufacturer-backed extended cover provided by Navico — add up to 3 extra years.
Extended cover is added to your order and confirmed with your warranty documentation.
Description
The WTP3 Analogue Interface is one of two module types that connect the system's sensors to the WTP3 CPU, handling analogue data acquisition. It provides six analogue inputs - four 12-bit (three at -5V to +5V and one at 0V to 5V) and two 10-bit (0V to 5V) - together with two pulse inputs, allowing it to interface masthead units, paddlewheel speed sensors, analogue rate-gyros, potentiometers and similar devices. The module draws power from the CAN bus and can supply power to the connected sensors, and it can be sited anywhere on the CAN network with a unique device address set by DIP switches. A diagnostic LED indicates power and data activity. Supplied with a CAN cable and CAN T-piece for connection to the network.
PRODUCT DETAILS
- Analogue data-acquisition module for the B&G WTP3 system
- Six analogue inputs (four 12-bit, two 10-bit)
- Two pulse inputs for paddlewheel speed sensors and masthead units
- Interfaces masthead units, speed sensors, rate-gyros and potentiometers
- Powered from the CAN bus and can supply connected sensors
- DIP-switch device addressing and a diagnostic status LED
- Supplied with CAN cable and CAN T-piece
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
General
| Type | WTP3 analogue data-acquisition module |
Ports
| Analogue Inputs | 6 total: 4 x 12-bit (3 at -5V to +5V, 1 at 0V to 5V) and 2 x 10-bit (0V to 5V) |
| Pulse Inputs | 2 (e.g. paddlewheel speed sensor or masthead unit) |
| Typical Sensors | Masthead units, speed sensors, analogue rate-gyros, potentiometers |
Connectivity
| Network | CAN bus (connects anywhere on the network) |
| Addressing | DIP-switch device number |
Electrical
| Power | Powered from CAN bus; can supply connected sensors |
Features
| Diagnostic LED | Power and data activity indicator |
In the Box
| Supplied With | CAN cable and CAN T-piece |
No videos available for this product.
No frequently asked questions for this product.
