Raymarine

Raymarine P79 In Hull Depth Transducer with Fitting Kit

£225.00
Tax included.
E26001-PZ
Adjustable in-hull depth transducer supplied with the P79 fitting kit. Reads through a solid fibreglass hull with no penetration, deadrise up to 22 degrees, 8-pin DSM connector.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Raymarine P79 in-hull depth transducer easily adjusts to hull deadrise angles up to 22 degrees, ensuring the sonar beam is oriented vertically to receive strong echoes and accurate depth readings. Unlike traditional puck-type transducers it uses an adjustable flange that bonds to the inside of a solid fibreglass hull with quick-setting marine epoxy and is dialled in to the boat's deadrise before being filled with non-toxic antifreeze and capped.

This package is supplied complete with the P79 fitting kit so no additional parts are needed for installation, and no cutting or drilling of the hull is required. The transducer is fitted with a Raymarine 8-pin DSM-style connector compatible with the CP370 sonar module and legacy CP300, DSM300, DSM30 and DSM250 modules. It suits solid fibreglass hulls up to 5/8 inch thick and, being an in-hull design, does not include a water-temperature sensor.

PRODUCT DETAILS

  • In-hull depth transducer reads through a solid fibreglass hull with no external protrusion
  • Supplied complete with the P79 fitting kit for installation
  • Adjustable flange accommodates hull deadrise angles up to 22 degrees
  • Epoxy installation with no cutting or drilling required
  • Raymarine 8-pin DSM-style connector (CP370, CP300, DSM300, DSM30, DSM250)
  • No water-temperature sensor (in-hull design)
  • P79 in-hull depth transducer
  • P79 fitting kit

No compatible transducers listed for this product.

No spares or accessories listed for this product.

General

MeasurementsDepth only (in-hull, no temperature sensor)
MountingIn-hull, bonded inside the hull with marine epoxy; no hull penetration
Deadrise rangeUp to 22 degrees (adjustable flange)
Hull suitabilitySolid fibreglass up to 5/8 inch (16 mm)

Sonar

Operating frequency50 / 200 kHz

Interface

ConnectorRaymarine 8-pin DSM-style (CP370, CP300, DSM300, DSM30, DSM250)

No videos available for this product.

No downloads available for this product.

What is included with E26001-PZ?
This package includes the P79 in-hull depth transducer together with its fitting kit, so you have everything needed to bond it inside the hull.
Does it need a hole in the hull?
No. The P79 reads through a solid fibreglass hull from the inside, so no hole, cutting or drilling is required.
What is the maximum deadrise it supports?
The adjustable flange accommodates hull deadrise angles up to 22 degrees for a vertical, straight-down beam.