Arco
ARCO Zeus Bluetooth Alternator Regulator - Standard Package
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The ARCO Zeus is a high-energy external Bluetooth alternator regulator that takes full control of an engine-driven alternator to charge 12V, 24V, 36V and 48V battery banks. It is lithium-aware, with pre-set battery libraries and fully configurable charge profiles for LiFePO4 and lead-acid deep-cycle batteries, and it is the only external regulator with password-protected Bluetooth and a native iOS and Android app for installation, monitoring and tuning without plugging in. Zeus reads two shunts at once, battery and alternator, and reacts to real-time current and temperature data to protect both the batteries and the alternator.
Built-in State of Charge removes the need for a separate monitor, while Generator Mode lets the engine act as a dedicated generator, sending 100 percent of the alternator field to replenish the bank quickly on less fuel. An alternator temperature sensor cuts field current to protect small engines and factory alternators from overheating at idle. Zeus integrates with wider systems over CAN bus and NMEA 2000, including Victron installations such as the Cerbo GX and Lynx Smart BMS, and it is agnostic to alternator brand. It carries an IP66/67 waterproof rating and is CE marked.
PRODUCT DETAILS
- Password-protected Bluetooth with a native iOS and Android app for install, monitoring and configuration
- Charges 12V, 24V, 36V and 48V banks; lithium (LiFePO4) and lead-acid deep-cycle pre-set battery libraries
- Reads two shunts (battery and alternator) and reacts to real-time current and temperature
- Built-in State of Charge (SOC) removes the need for a separate battery monitor
- Generator Mode sends 100 percent of alternator field to the bank for fast, fuel-efficient charging
- Alternator temperature sensing protects small engines and alternators from overheating at idle
- CAN bus and NMEA 2000 networking; integrates with Victron Cerbo GX and Lynx Smart BMS
- Standard package includes 6 ft alternator and battery harnesses plus two 15 ft temperature sensors; P-Type and N-Type compatible, IP66/67 and CE marked
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
ARCO Alternator 12V 275A DF315 - Dual Foot 3.15" - Side Battery Post - Externally Regulated - Standard Ground - 49mm K6 Pulley - 4020
ARCO Alternator - 12V 275A DF315 - Dual Foot 3.15" - Side Battery Post - Externally Regulated - Isolated Ground - 49mm K6 Pulley - 4021
ARCO Alternator - 24V 4kW DF315 - Dual Foot 3.15" - Side Battery Post - Externally Regulated - Isolated Ground - 49mm K6 Pulley - 4402
ARCO Alternator - 24V 4kW DF4 - Dual Foot 4" - Side Battery Post - Externally Regulated - Isolated Ground - 49mm K6 Pulley - 4403
ARCO Alternator - 12V 275A - N62 Side Battery Post - Externally Regulated - Standard Ground - 50mm K6 Pulley - 4026
ARCO Alternator - 48V 8kW DF4 - Dual Foot 4" - Side Battery Post - Externally Regulated - Isolated Ground - 49mm K6 Pulley - 4603
ARCO Alternator - 48V 8kW - N62 Side Battery Post - Externally Regulated - Isolated Ground - 50mm K6 Pulley - 4604
ARCO Alternator - 48V 8kW DF315R - Dual Foot 3.15" - Rear Battery Post - Externally Regulated - Isolated Ground - 49mm K6 Pulley - 4602
ARCO Alternator - 24V 7kW DF315 - Dual Foot 3.15" - Rear Battery Post - Externally Regulated - Isolated Ground - 49mm K6 Pulley - 4502
Performance
| State of Charge (SOC) | Yes, built in (removes the need for a separate battery monitor) |
| Generator Mode | Sends 100 percent of alternator field to charging while in neutral for fast, fuel-efficient charging |
| Regulator optimization | Measures and reacts to battery current and temperature and alternator current and temperature |
Electrical
| System voltage | 12V, 24V, 36V, 48V |
| Field type | P-Type (B-Circuit) and N-Type (A-Circuit) compatible via included harness |
| Max operating temperature | 80 C (176 F) |
| Weight | 1.7 lb (0.77 kg) |
| Enclosure dimensions | 8.2 x 5.9 x 2.4 in without antenna; 8.2 x 7.5 x 2.4 in with antenna |
Connectivity
| Bluetooth | Yes, password protected |
| NMEA 2000 | Yes |
| CAN connections | 2 |
| RJ45 | Yes |
| Feature-in ports | 2 (user-selectable control inputs) |
| Feature-out port | 1 (lamp or control relay) |
| Dedicated signal wire | Disables charging from an external source such as a BMS |
| Management | Native ARCO app for wireless install, monitoring, diagnostics and settings |
Compatibility
| Battery chemistries | Lithium (LiFePO4) and lead-acid deep cycle, with pre-set libraries |
| Alternator compatibility | Agnostic, works with any brand of alternator |
| Network integration | Victron systems including Cerbo GX and Lynx Smart BMS |
| Waterproof | Yes, IP66/67 rating |
| CE mark | Yes |
General
| Included | Regulator, 6 ft alternator wiring harness, 6 ft battery wiring harness, two 15 ft thermistors |
| Country of origin | United States |
| Warranty | 2 years |
No videos available for this product.
