Balmar
Balmar SG200 Battery Monitor Kit - 12-48v - includes Colour Display, SmartShunt (350A) and comm cable.
£424.80
/
Tax included.
Shipping calculated at checkout.
SG200
Second generation expandable marine battery monitor kit with colour display, 350A SmartShunt and SmartLink cable, 12 to 48V.
✓
Available for collection or delivery in ~2 days
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Balmar SG200 is a second generation, expandable battery monitor that learns your battery bank and reports its true condition on a bright, sunlight readable colour display housed in a standard 2 inch round gauge. Using a precision SmartShunt to measure every amp flowing in and out, the SG200 continuously calculates State of Charge, State of Health, current, voltage and time remaining, and it reaches around 97 percent accuracy within two charge cycles without losing accuracy as the batteries age. It suits all common chemistries including flooded lead acid, AGM, gel and lithium (LiFePO4), and scales automatically to 12, 24, 36 or 48 volt systems.
Out of the box the kit monitors one house battery or bank plus voltage on up to two starting batteries, and the modular SmartLink network lets you grow the system by adding further SmartShunts for additional banks and extra colour displays for other helm stations. Everything connects with a shielded four wire SmartLink cable, and an optional Bluetooth gateway links the monitor to the Balmar SmartLink smartphone app. The complete kit supplied here includes the colour display, the 350 amp SmartShunt and a 10 metre SmartLink communication cable.
PRODUCT DETAILS
- Bright, sunlight readable colour display in a standard 2 inch (52mm) round gauge
- Reports State of Charge, State of Health, current, voltage, time remaining, history and alerts
- Typically 97 percent accurate within two cycles and does not lose accuracy with age
- 350A SmartShunt (600A for 10 minutes) with IP67 protection for reliable current measurement
- Works with flooded, AGM, gel and LiFePO4 batteries and auto scales for 12, 24, 36 and 48V
- Expandable SmartLink network supports up to 32 devices, additional shunts and displays
- Optional Bluetooth gateway connects to the Balmar SmartLink app
- Complete kit includes colour display, 350A SmartShunt and 10m SmartLink cable
No exploded diagram available for this product.
No compatible transducers listed for this product.
No compatible products found.
Electrical
| Supply voltage range | 8 to 60V |
| System voltages supported | 12, 24, 36 and 48V (auto scaling) |
| Monitored battery size | 1Ah to 1310Ah per bank |
| Average supply current | Display on 20mA at 12V, sleep mode 10mA at 12V |
SmartShunt
| Max current at 24C (75F) | 350A continuous, 600A for 10 minutes |
| Operating temperature | -40C to +85C (-40F to +185F) |
| Dimensions | 123.7mm L x 84.8mm W x 50.9mm H |
Display
| Values shown | State of Charge, State of Health, voltage, charge/discharge current, time remaining, history, faults and alerts |
| Gauge cutout | Standard 2 inch (52mm) round gauge |
Network
| Standard configuration | 1 bank per SmartShunt plus 2 start/auxiliary voltage sense lines |
| Maximum network devices | Up to 32 devices including displays and SmartShunts |
| Communication cable | 4 wire, 22 AWG shielded, 4 pin Deutsch DT style |
General
| Protection rating | IP65 display (from front), IP67 SmartShunt |
| Standards compliance | CE EMC Directive 2014/30/EU, RoHS 2 Directive 2011/65/EU |
| In the box | Colour display, 350A SmartShunt, 10m SmartLink communication cable |
| Manufacturer | Balmar |
No videos available for this product.
Do I need a shunt with the SG200?
Yes. Unlike the algorithm based Smartgauge, the SG200 uses a precision SmartShunt to measure the actual current flowing in and out of the bank. The 350A SmartShunt is included in this kit and installs on the main negative connection of the battery bank.
Which battery types and voltages does the SG200 support?
The SG200 works with flooded lead acid, AGM, gel and lithium (LiFePO4) batteries. It scales automatically to 12, 24, 36 and 48 volt systems and monitors banks from 1Ah up to 1310Ah.
Can I monitor more than one battery bank?
Yes. Out of the box the kit monitors one house bank plus voltage on up to two starting batteries. Additional banks are monitored by adding further SmartShunts to the SmartLink network, and extra colour displays can be added for other helm stations, up to 32 devices in total.
