Maretron
Maretron Direct Current Monitor includes LEMHTA200-S TR3K and 2 FC01
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Maretron DCM100 Direct Current Monitor is an advanced device for measuring the voltage and current of any DC power source or load aboard your vessel. Sources such as batteries, alternators, solar panels and wind generators can be monitored, as can loads like inverters, windlasses, DC refrigerators and any DC branch circuit.
When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms combine battery temperature, load current, charging current and terminal voltage to compute battery state of charge and time remaining. To measure current it uses an included state-of-the-art Hall effect sensor that slips over the cable, so there is no need to break connections or install an inline shunt as with other solutions.
The DCM100 is a key component of the Maretron N2KView vessel monitoring and control system, and being NMEA 2000 certified it lets you view all of your DC information anywhere on the vessel using a compatible display.
PRODUCT DETAILS
- Monitors voltage and current of any DC source or load
- Included Hall effect sensor slips over the cable, no shunt required
- Computes battery state of charge, time remaining and charge efficiency
- Reports battery voltage, current, ripple voltage and case temperature
- Ships with 200 Amp transducer, battery harness and temperature probe
- Waterproof and mountable in any orientation
- Displays on any compatible Maretron NMEA 2000 display
- DCM100 Direct Current Monitor
- LEMHTA200-S 200 Amp current transducer with cable
- FC01 battery harness with fuse
- TR3K ring/under-bolt temperature probe
No exploded diagram available for this product.
No compatible transducers listed for this product.
Measurement
| Battery Sense Voltage Range | 0 to 50 VDC |
| Battery Sense Voltage Accuracy | +/-100 mV |
| Battery Current Range | 0 to 200 A (with included Hall-effect sensor) |
| Battery Current Accuracy | +/-1% (with included Hall-effect sensor) |
Electrical
| Operating Voltage | 9 to 32 Volts (NMEA and battery interface) |
| Power Consumption (Battery Interface) | 70mA |
| Power Consumption (NMEA 2000) | 50mA |
| Load Equivalence Number (LEN) | 1 |
| Reverse Battery Protection | Yes (indefinitely) |
| Load Dump Protection | Yes |
Mechanical
| Size | 88.9mm x 106.7mm x 51.6mm (3.50" x 4.20" x 2.03") |
| Weight | 368.5 g (13 oz) |
Environmental
| Degree of Protection | IP64 |
| Operating Temperature | -25C to 55C |
| Storage Temperature | -40C to 70C |
NMEA 2000
| Certification Level | Level A |
Certifications
| Standards | IEC 60945, IEC 61162-3, FCC and CE Mark |
No videos available for this product.
No downloads available for this product.
