Icom

Icom IC-M804 MF/HF Marine SSB Transceiver

£3,975.00
Tax included. Shipping calculated at checkout.
IC-M804
The Icom IC-M804 is a long-range MF/HF Class E DSC marine SSB transceiver for ocean-going and commercial non-GMDSS use. It offers a distress button, DSC watch-keeping, a 4.3 inch colour display, integrated GNSS and NMEA 2000 connectivity. Based on the MED approved GM800 and CE marked for the RED.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Icom IC-M804 is a long-range MF/HF Class E DSC marine SSB transceiver built for ocean-going sailors and commercial non-GMDSS operators who need dependable communications far beyond VHF range. It is based on the MED approved Class A GMDSS GM800, sharing almost identical functionality apart from its DSC class, and is CE marked for the European Radio Equipment Directive.

A large independent Distress button with a spring-loaded cover sends an automated digital distress call with GNSS coordinates, while a dedicated DSC watch-keeping receiver continuously scans the six distress channels. The 4.3 inch wide viewing angle colour TFT display, directional keypad and soft keys make day-to-day operation straightforward, and the integrated GNSS receiver, NMEA 2000 and NMEA 0183/-HS connectivity tie the radio into the wider vessel network. An IPX7 protected controller and corrosion-resistant construction suit it to harsh maritime conditions, and 12 V and 24 V versions are available.

PRODUCT DETAILS

  • Class E DSC MF/HF SSB radio based on the MED approved GM800
  • Independent Distress button with spring-loaded cover
  • Built-in DSC watch-keeping receiver scanning six distress channels
  • 4.3 inch wide viewing angle colour TFT display
  • Integrated GNSS receiver, supplied with 5 m cable GNSS antenna
  • NMEA 2000 and NMEA 0183/-HS connectivity
  • Two minutes instant replay voice recorder
  • 125 W (PEP) RF output at AT-141 tuner output
  • IPX7 waterproof controller for harsh marine environments
  • Hand microphone
  • DC power cable
  • GNSS antenna
  • Remote controller and control cable
  • Mounting plates for the main unit
  • Mounting bracket kit for the remote controller

No exploded diagram available for this product.

No compatible transducers listed for this product.

No compatible products found.

General

Frequency coverage (Receive)500 kHz - 29.9999 MHz (continuous)
Frequency coverage (Transmit)1.6-2.9999, 4.0-4.9999, 6.0-6.9999, 8.0-8.9999, 12.0-13.9999, 16.0-17.9999, 18.0-19.9999, 22.0-22.9999, 25.0-27.5000 MHz
DSC frequencies2.1875, 4.2075, 6.3120, 8.4145, 12.5770, 16.8045 MHz
Mode (TX/RX)J3E (USB), J2B (AFSK), F1B (FSK)
Mode (RX only)J3E (LSB), A1A (CW), H3E (AM)
Antenna impedance50 ohms (unbalanced)
Power supply requirement10.8-15.6 V (12 V DC), 21.6-31.2 V (24 V DC) (negative ground)
Current drain (Receive)Less than 6 A (12 V) / 3 A (24 V) at max. audio output
Current drain (Transmit)Less than 40 A (12 V) / 20 A (24 V) at max. output power
Usable temperature range-15 C to 55 C
Dimensions (Main unit, W x H x D)367 x 95 x 260 mm
Dimensions (Controller, W x H x D)274 x 114 x 86 mm
Weight (Main unit)8.6 kg (approximate)
Weight (Controller)760 g (approximate)

Transmitter

Output power (1.6-3.9999 MHz)85 W pep at tuner output
Output power (4.0-27.5000 MHz)125 W pep at tuner output
Spurious emissionsLess than 50 dB peak output power (at max. power)
Carrier suppressionMore than 40 dB peak output power (at max. power)
Unwanted sideband suppressionMore than 55 dB peak output power (at max. power with 1500 Hz AF input)

Receiver

Audio output power4.0 W at 10% distortion with 4 ohm load
Clarity variable range+/-150 Hz
DSC sensitivity0 dB microvolt emf (1% error rate)

Environmental

Waterproof rating (Controller)IPX7 (1 m depth of water for 30 minutes)

No videos available for this product.

No frequently asked questions for this product.