Raymarine
Raymarine YachtSense Low Power Output Module with 4 x 10 Amp Outputs
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Raymarine cover is 2 years (3 with 90-day registration). Add 1 or 2 more years with HME Care Plus.
Extended cover is added to your order and confirmed with your warranty documentation.
Description
The Raymarine YachtSense Low Power Module brings precise digital control to the lower-powered electrical loads found throughout a vessel. With four independent 10 A output channels it is well suited to lighting circuits, wiper motors and similar devices, supporting up to four separate loads from a single module.
Each channel is fully dimmable for all types of lights and capable of soft start and soft stop, while built-in load-current measurement, over-current protection, under-current detection, a configurable software fuse and voltage detection keep the system safe and informative. Three layers of redundancy are provided on every circuit. The module is supplied with its fuses fitted (15 A per the installation manual) and forms part of a Master or Remote assembly, drawing its module communications through an internal 6-pin connection.
PRODUCT DETAILS
- Digital output module with 4 x 10 A channels (up to 40 A total)
- Drives lights, wiper motors and other lower-powered devices (up to 4 loads)
- Fully dimmable outputs with soft start and soft stop
- Per-channel load-current measurement, over-current protection and under-current detection
- Software (soft) fuse and voltage detection on every channel
- Three layers of redundancy on all circuits; supplied with fuses fitted
- YachtSense Low Power output module (supplied fitted with Molex connector(s) and fuses)
- Documentation
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
Raymarine Axiom 2 Pro 9 RVM
Raymarine Axiom 2 XL 24 Chartplotter
Raymarine Axiom 2 Pro 16 S
Raymarine Axiom 2 Pro 12 RVM
Raymarine YachtSense Master Unit (12v or 24v) with 2 x J1939, 2 x RS485, Ethernet & STNG inputs
Raymarine Axiom 2 Pro 9 S
Raymarine Axiom 2 Pro 16 RVM
Raymarine Axiom 2 XL 16 Chartplotter
Raymarine Axiom 2 XL 22 Chartplotter
Raymarine Axiom 2 XL 19 Chartplotter
Raymarine YachtSense Remote Unit (12v or 24v) with up to 8 x Signal Inputs or 8 x Signal (50mA) Outputs
Raymarine Axiom 2 Pro 12 S
Power
| Nominal supply voltage | 12 V dc / 24 V dc |
| Operating voltage range | 8 V dc to 32 V dc |
| Maximum output current | 40 A (10 A per channel) |
| Minimum output current | 50 mA |
Connectivity
| Output connections | 4 x 10 A output channels |
| Module communications | Internal 6-pin connection |
Protection
| Channel protection | Load-current measurement, over-current protection, under-current detection, soft fuse, voltage detection |
| Factory-fitted fuse rating | 15 A |
Physical
| Dimensions (H x W x D, excl. busbars) | 172 mm x 28.00 mm x 76.50 mm |
| Weight | 0.27 kg (0.60 lb) |
