Raymarine

Raymarine CP570 Professional CHIRP Sonar Module

£1,895.00
Tax included.
E70258
The CP570 is a professional 2 kW dual-channel CHIRP sonar module with up to 4 kW of combined power. Its two fully independent channels deliver fast target identification and high-resolution imagery for serious offshore and tournament fishing, with bottom tracking to 3,000 m (10,000 ft) and a RayNet connection to compatible LightHouse displays.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

Engineered for serious anglers, the Raymarine CP570 is a professional dual-channel CHIRP sonar module that brings best-in-class target separation and high-resolution sonar imagery to compatible Raymarine LightHouse multifunction displays. Using a wide spectrum of frequencies and greater sensitivity, its advanced CHIRP transceiver can see through dense schools of baitfish, identify thermoclines and simultaneously target the game fish you want.

The CP570's two fully independent 2 kW sonar channels deliver up to 4 kW of combined output power and faster target identification, letting you hunt different parts of the water column at once. Rated for offshore use and rough conditions, it tracks the sea floor down to 3,000 m (10,000 ft) with ten times the resolution of ordinary sonar, while TruZoom magnification and ultra-fast ping-rate processing keep targets sharp and bottom tracking accurate.

The module automatically recognises connected transducers and optimises its settings, and connects to the network over RayNet. Choose low, medium and high CHIRP transducers in standard or wide-beam to match your fishing.

PRODUCT DETAILS

  • Professional 2 kW dual-channel CHIRP sonar module with up to 4 kW of combined output power
  • Two fully independent CHIRP channels for faster target identification across the water column
  • Wide-spectrum CHIRP transceiver sees through baitfish, identifies thermoclines and targets game fish
  • Tracks the sea floor down to 3,000 m (10,000 ft) for offshore and tournament fishing
  • Ten times the resolution of ordinary sonar with sharper, better-defined targets
  • TruZoom magnification and ultra-fast ping-rate processing for accurate bottom tracking
  • Automatically recognises connected transducers and optimises sonar settings
  • Connects to Raymarine LightHouse multifunction displays over the RayNet network
  • Sonar module
  • Power cable 1.5 m (5 ft)
  • Fixings x 4
  • Cable ferrite
  • Documentation
  • RayNet (Female) to RayNet (Female) network cable 2 m (6.56 ft)

No compatible products found.

Sonar

Sonar typeProfessional wide-spectrum CHIRP sonar
Sonar channelsTwo fully independent CHIRP channels
Power outputUp to 2 kW per channel (maximum); 4 kW combined
Frequency25 kHz to 255 kHz
Depth range0.6 m (2 ft) to 3,000 m (10,000 ft) (dependent upon connected transducer)

Physical

Network connectionRayNet connector, 10 / 100 Mb/s
Transducer connectionTransducer connection
Power connectionDedicated power connection
DimensionsHeight: 248.1 mm (9.8 in), Width: 352.5 mm (13.9 in), Depth: 109.9 mm (4.3 in)
Weight6.35 kg (14.0 lbs)

Power

Nominal supply voltage12 V dc / 24 V dc
Operating voltage range10.8 V dc to 31.2 V dc
Power consumption30.6 W (maximum)
Current3 A RMS
Fuse rating5 A

Environmental

Waterproof ratingIPx6
Operating temperature-20 C to +50 C (-4 F to 122 F)
Storage temperature-30 C to +70 C (-22 F to 158 F)
Relative humidityUp to 95%

Conformance

StandardsEN 60945:2002
EMC directiveEMC Directive 2014/30/EU
Regional approvalsAustralia and New Zealand: C-Tick, Compliance Level 2

No videos available for this product.

No downloads available for this product.

What is the Raymarine CP570?
The CP570 is a professional 2 kW dual-channel CHIRP sonar module. It adds best-in-class CHIRP fishfinding to a compatible Raymarine LightHouse multifunction display, connecting over the RayNet network.
How much power does the CP570 produce?
The CP570 has two fully independent sonar channels, each delivering up to 2 kW, for up to 4 kW of combined output power. It operates across a 25 kHz to 255 kHz frequency range and tracks the bottom from 0.6 m (2 ft) to 3,000 m (10,000 ft).
How is the CP570 different from the CP470?
The CP470 offers two adjustable CHIRP channels from a single transceiver, while the CP570 has two fully independent 2 kW channels (up to 4 kW combined). The CP570 is built for professional, tournament and offshore anglers who need to view different parts of the water column simultaneously.
What transducers does the CP570 use?
The CP570 uses CHIRP transducers and requires two elements to function, either Low/High, Low/Medium or Medium/High. The two elements can be within a single transducer or supplied as a transducer pair. Compatible families include the M265, R111, R509, R599, TM275 and PM-series.
What is included in the box?
The CP570 ships with the sonar module, a 1.5 m (5 ft) power cable, four fixings, a cable ferrite, a 2 m (6.56 ft) RayNet to RayNet network cable and documentation. Transducers are ordered separately.