Maretron
Maretron Fluid Pressure Monitor
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Maretron FPM100 Fluid Pressure Monitor connects up to six pressure transducers to the NMEA 2000 network, letting you observe fluid pressures and tank levels anywhere there is a compatible display. Transducers are sold separately, and with the appropriate transducer the FPM100 reports either pressure or vacuum for applications such as water pressure, oil pressure, hydraulic pressure, or system vacuum to detect a clogged filter.
Each of the six channels is independently programmable, both to match the characteristics of its transducer and to select pressure/vacuum mode or tank-level mode. In tank-level mode a transducer mounted at the bottom of a tank reports the fluid level over the network, making it ideal for tanks that are extremely deep, contain internal structures, or are otherwise unsuited to conventional level senders. The channel can be calibrated for irregular tank shapes so the reported level is accurate.
As part of a Maretron monitoring system the FPM100 lets pressures and levels be displayed, logged and alarmed alongside the rest of your vessel data.
PRODUCT DETAILS
- Interfaces up to six pressure transducers to the NMEA 2000 network
- Each channel independently programmable to match its transducer
- Selectable pressure/vacuum mode or tank-level mode per channel
- Tank-level mode suits deep or irregular tanks unsuited to conventional senders
- Calibrates for irregularly shaped tanks for accurate level reporting
- Monitors water, oil and hydraulic pressure or system vacuum for clogged filters
- NMEA 2000 certified for display anywhere on the vessel
- FPM100-01 Fluid Pressure Monitor
- Mounting hardware
- User's manual
No exploded diagram available for this product.
No compatible transducers listed for this product.
PRESSURE TRANSDUCER 0-1.5 PSI
PRESSURE TRANSDUCER 0 TO 3 PSI
Maretron Pressure Transducer 0 to 5 PSI FPM100
PRESSURE TRANSDUCER 0 TO 10PSI
Image coming soonMaretron Pressure Transducer 0-50 PSI
Maretron Pressure Transducer 0-100 PSI FMP100
Maretron Pressure Transducer 0 to 500 PSI FPM100
Image coming soonMaretron Pressure Transducer 0 to 1000 PSI FPM100
Image coming soonMaretron Pressure Transducer 0 to 5000 PSI FPM100
Maretron Pressure Transducer Vacuum to 1 Bar
PRESSURE SNUBBER
Image coming soonSUB PRESS TRANSDUCER 0-1.5 PSI
Image coming soonMaretron Submersible Pressure Transducer 0 to 3.0 PSI
Image coming soonSUB PRESS TRANSDUCER 0-5 PSI
No compatible products found.
Performance
| Accuracy | ±1% FS (exclusive of pressure transducer) |
| Resolution | ±0.33% FS over full pressure transducer range |
| Pressure Transducer Inputs | Up to 6 channels |
| Pressure Source Types | 21 (water, atmospheric, compressed air, hydraulic, steam plus 16 user-defined) |
Electrical
| Operating Voltage | 9 to 32 Volts DC |
| Power Consumption | 400mA maximum current drain |
| Load Equivalence Number (LEN) | 8 |
| Reverse Battery Protection | Yes, indefinitely |
Mechanical
| Size | 3.50" x 4.20" x 2.03" (88.9mm x 106.7mm x 51.6mm) including mounting flanges |
| Weight | 13 oz (368.5 g) |
Environmental
| Degree of Protection | IP64 |
| Operating Temperature | -25°C to 55°C |
| Storage Temperature | -40°C to 70°C |
NMEA 2000
| Certification Level | Level A |
Certifications
| Standards | NMEA 2000 Level A, IEC 61162-3, tested to IEC 60945, FCC and CE Mark |
No videos available for this product.
No downloads available for this product.
