Simrad

Lowrance, Simrad NAC-1 Autopilot Computer

£739.99
Tax included. Shipping calculated at checkout.
000-11769-001
The NAC-1 is a compact NMEA 2000 autopilot computer for boats up to 9 metres (30 ft). It is the brains behind the Outboard Pilot and DrivePilot systems, driving the Simrad PUMP-1 hydraulic pump or HELM-1 cable-steer unit. Virtual Rudder Feedback simplifies installation on outboard and sterndrive boats, with plug-and-play connectors throughout.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Navico Extended Warranty

Manufacturer-backed extended cover provided by Navico — add up to 3 extra years.

Extended cover is added to your order and confirmed with your warranty documentation.

Description

The Simrad NAC-1 is a compact autopilot computer designed for boats up to 9 metres (30 ft) in length. It is the brains behind the Outboard Pilot and DrivePilot systems, holding the steering algorithms and the electronics that drive the actuator motor and clutch. It is engineered to power either the Simrad PUMP-1 reversible hydraulic pump for hydraulic-steered outboards, or the HELM-1 drive unit for cable-steered vessels, with a reversible motor output rated at 8 A continuous and 16 A peak.

Simrad Virtual Rudder Feedback technology lets the NAC-1 run without a separate rudder feedback unit on outboard and sterndrive boats with planing hulls, cutting installation cost and complexity where a feedback sensor would be impractical. Where a physical sensor is preferred, the computer also supports the Simrad RF25 and 0-5 V rudder feedback units.

Plug-and-play connectors keep wiring to a minimum, and industry-standard NMEA 2000 networking links the NAC-1 to heading sensors, rudder feedback units and multifunction displays anywhere on board. The housing carries an IPx5 waterproof rating for typical bilge and locker installations.

PRODUCT DETAILS

  • Compact NMEA 2000 autopilot computer for boats up to 9 m (30 ft)
  • Drives the Simrad PUMP-1 reversible hydraulic pump or HELM-1 cable-steer drive
  • Virtual Rudder Feedback for simplified installation on outboard and sterndrive boats
  • Reversible motor drive output, 8 A continuous / 16 A peak
  • Plug-and-play connectors minimise installation wiring
  • Industry-standard NMEA 2000 connectivity (1 x Micro-C, 3 LEN)
  • IPx5 waterproof rating
  • NAC-1 autopilot computer
  • NAC-1 power cable, 2 m

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

Electrical

Supply voltage9 - 16 V DC
Power consumption140 mA plus drive unit load
Recommended fuse rating20 A
Drive output12 V DC, reversible motor control, 8 A continuous / 16 A peak (1 s)

Connectivity

NMEA 20001 x CAN Micro-C port, 3 LEN
Compass supportNMEA 2000
Rudder sensor supportVirtual Rudder Feedback (VRF), 0-5 V, RF25
Drive integrationReversible pump (PUMP-1) or Helm drive (HELM-1)

Environment

Operating temperature-25 C to +55 C
Storage temperature-30 C to +70 C
Waterproof ratingIPx5

Physical

Weight0.6 kg
Dimensions (W x H x D)204 x 190 x 57 mm
MountingBulkhead
Compass safe distance0.5 m

General

Recommended boat lengthUp to 9 m (30 ft)
Warranty2 years

No videos available for this product.

No downloads available for this product.

What size boat is the NAC-1 for?
The NAC-1 autopilot computer is recommended for boats up to 9 metres (30 ft) in length.
Which drives does the NAC-1 support?
It is designed to drive the Simrad PUMP-1 reversible hydraulic pump for hydraulic-steered outboards, or the HELM-1 cable-steer drive unit for cable-steered vessels. The drive output is 12 V DC reversible motor control rated at 8 A continuous and 16 A peak.
Does the NAC-1 need a rudder feedback unit?
Not always. The NAC-1 uses Simrad Virtual Rudder Feedback, which removes the need for a separate feedback unit on outboard and sterndrive boats with planing hulls. It also supports 0-5 V feedback and the Simrad RF25 where a physical sensor is preferred.
What supply voltage and fuse does the NAC-1 need?
The NAC-1 runs on 9 to 16 V DC with a recommended fuse rating of 20 A. Power consumption is 140 mA plus the drive unit load.
How does the NAC-1 connect to the rest of the system?
It uses a single CAN Micro-C NMEA 2000 port (3 LEN) for plug-and-play connection to heading sensors, rudder feedback units and multifunction displays. The housing is IPx5 rated.
Which autopilot systems use the NAC-1?
The NAC-1 is the computer at the heart of the Simrad Outboard Pilot and DrivePilot system packs.