Discontinued

This product has been discontinued by Simrad and is no longer available to buy.

Not sure what replaces it? Talk to us.

Contact HME

or call us on +442380455129

Simrad

Lowrance, Simrad - HDI Bronze Thru Hull Transducer Blue Plug 0 deg Tilt

000-11133-001
This Hybrid Dual Imaging bronze thru-hull transducer combines traditional 50/200 kHz 2D sonar with 455/800 kHz DownScan Imaging in a single fitting, with built-in depth and temperature. The 0 degree element suits near-flat hulls, and it terminates in a blue 7-pin connector on a 10 m cable.

Description

This Lowrance and Simrad Hybrid Dual Imaging (HDI) bronze thru-hull transducer brings two complementary sonar views together in one low-profile fitting. Traditional 50 and 200 kHz CHIRP 2D sonar gives proven deep-water target detection and arch fish marking, while 455 and 800 kHz DownScan Imaging adds photo-like detail of structure and bottom contours directly beneath the boat. The 50 kHz beam reaches to around 3,000 ft (914 m) while DownScan resolves fine detail to around 300 ft (91 m).

The bronze housing is a permanent thru-hull installation for fibreglass and wood hulls, and this 0 degree version suits near-flat deadrise so the elements fire vertically. A built-in depth and temperature sensor is included. It terminates in a blue 7-pin connector on a 10 m cable; current 9-pin XSonic Simrad and Lowrance displays connect using the 000-13313-001 adapter cable.

PRODUCT DETAILS

  • Hybrid Dual Imaging: 50/200 kHz 2D plus 455/800 kHz DownScan
  • Traditional sonar to around 3,000 ft (914 m) at 50 kHz
  • DownScan Imaging detail to around 300 ft (91 m)
  • Bronze thru-hull housing for fibreglass and wood hulls
  • 0 degree element for near-flat deadrise hulls
  • Built-in depth and temperature sensor
  • Blue 7-pin connector on a 10 m cable

No exploded diagram available for this product.

No compatible transducers listed for this product.

Sonar

TypeHybrid Dual Imaging bronze thru-hull
ImagingTraditional 2D plus DownScan Imaging
Depth & temperatureYes

Frequencies

Traditional sonar50 kHz and 200 kHz
DownScan Imaging455 kHz and 800 kHz

Beam

50 kHz beam45 degrees (-3 dB)
200 kHz beam11 degrees (-3 dB)
455 kHz coverage3 degrees fore/aft, 55 degrees port/starboard
800 kHz coverage1.5 degrees fore/aft, 30 degrees port/starboard

Power

Max depth 50 kHz914 m (3,000 ft)
Max depth 200 kHz305 m (1,000 ft)
Max depth DownScan91 m (300 ft) at 455 kHz

Connector

ConnectorBlue 7-pin

Cable

Cable length10 m (33 ft)

Physical

HousingBronze thru-hull
Element tilt0 degrees

No videos available for this product.

No downloads available for this product.

What frequencies does this HDI transducer use?
It uses traditional 50 and 200 kHz 2D sonar plus 455 and 800 kHz DownScan Imaging in a single thru-hull element.
How deep will it read?
Traditional 50 kHz sonar reaches around 3,000 ft (914 m), 200 kHz around 1,000 ft (305 m), and DownScan Imaging resolves detail to around 300 ft (91 m).
Which hull does the 0 degree version suit?
The 0 degree element suits near-flat deadrise hulls. The bronze housing fits fibreglass and wood hulls.
Does it measure depth and temperature?
Yes. It has a built-in depth and temperature sensor.
What connector does it use?
It uses a blue 7-pin connector on a 10 m cable. To connect to a current 9-pin XSonic display, use the 000-13313-001 adapter cable.